Praetorians Multiplayer Demo

Death or Glory? Your destiny awaits on the battlefield.....

  • Category Real-Time
  • Size 49.9 MB
  • Program by Eidos and Pyro Studios

Praetorians Multiplayer Demo

Death or Glory? Your destiny awaits on the battlefield... Battle for supremacy against your friends and foes! In Praetorians you can wage war with up to 8 players via the Internet or a local area network (LAN). The game fully supports the GameSpy Arcade system for online play. Skirmish Mode allows you to play against three AI opponents.

Praetorians Multiplayer Demo

README 12/02/2003 Version 1.0

Part 1: Things You Should Know

Part 2: Technical Issues

Part 3: Game Instructions Summary

Part 1: Things You Should Know

Please read through the DirectX section of this document. This section has information that is vital to successfully running Praetorians on your system.

1.1 DirectX

This game is optimised for Microsoft's DirectX 8.1. In order for you to play the game, you must have DirectX 8.1 or higher-compliant drivers for your video card and sound card.

You will need to obtain the latest DirectX 8.1 drivers from your card manufacturer or PC supplier. These drivers cannot be supplied by Eidos.

The latest DirectX 8.x can be downloaded from the following website:

1.2 Memory and Performance

While the game will run fine in 128 Mb of RAM, your playing experience will be smoother if you have at least 256 Mb.

Regardless of how much memory you have, you can maximize your available memory and increase the overall performance of the game engine by doing the following:

q Closing any open windows

q Shutting down all other programs, including menu-bar programs like ICQ

q Defragmenting your hard drive

Eidos recommends that you have no other programs running at all while playing Praetorians. Other programs, including virus checkers, system utilities and screen savers can cause system degradation when playing games software and may conflict with the game for system resources, potentially resulting in instability and crashes.

1.3 Known Issues

q We highly recommend that you do not ALT-TAB out of Praetorians at any time.

q Zonealarm.

Clicking multiplayer on the main menu for first time may appear to make the game hang, however it is Zonealarm requesting permission for Praetorians. If the Zonealarm configuration screen isn’t visible at this time, simply press R and Y, this will send the required commands to Zonealarm to allow you to continue. If however it is still appearing to hang try pressing R and Y again (if this is your first time playing an online game of any kind there may be DirectPlay request being made Zonealarm). Praetorians should now take you to the ingame lobby. Alternately setting your security level within Zonealarm to medium instead of high will enable the game to connect. In rare cases Zonealarm may lock up Praetorians, simply reboot and go to the `programs` section within Zonealarm, and enable `Praetorians`. If it is not listed, simply try the multiplayer option again. See Zonealarm for more detailed help on enabling programs within its configuration program.

q Matrox G400 & Win98

User may experience strange graphical problems after a prolonged gaming session, or even have the monitor switch itself off. There is no known driver fix for this, however ensuring your graphics card is properly cooled will help reduce the chance further of this problem occurring. This problem has not been seen in Windows 2000 or Windows XP.

q Network gaming

Praetorians supports LAN (TCP/IP) and online gaming. Online gaming is best experienced with a broadband connection.

56k modems will work, but user may suffer performance loss or game lag if more than 3 players are playing on a 56k modem in the same game.

If you experience any problems on a 56k modem ensure that your Internet connection is still active (some ISP’s will automatically disconnect you after 2 hours usage). Ensure you are not running other programs, which may be taking up your modem’s bandwidth.

The host machine should be the fastest of the machines available; this will help reduce any possibility of lag within the game.

The in-game lobby is designed to be used on LAN (TCP/IP), however you can connect to online games if you know the IP address of the server. For online games it is best to use Gamespy (provided) to find fellow online gamers.

q ‘Sticky Keys’

If pressing the Shift key 5 times in succession brings up a `sticky keys` configuration screen within your game, simply go to `control panel\accessibility options\keyboard\` The top option will be for Sticky Keys, select Settings and uncheck the `Use Shortcut` button. This will disable this function

q Admin Rights

When running Praetorians on a machine that is running Windows 2000 or XP. It requires the user to have full admin rights on the machine to enable the creation of a users profile within the game.

q Game resolution

Praetorians front-end menus are all displayed at 1024x768, however within the Video options the user can reduce the in-game resolution to 800x600 or 640x480 if they so wish.

q Mouse Drivers

Some mouse drivers will not report Mouse Wheel (Central Button) actions to full screen graphics programs like games. There is no known fix for this issue, but you can still access the Mouse Wheel functionality in the game using the Page Up and Page Down keys.

q Video Codecs

We recommend that you update the video codec on your machine (which is not the same thing as video drivers). To do this please visit…

Windows Update

1.4 Additional Information

q Windows ME: Praetorians can run on systems with Windows ME though neither Eidos Interactive nor Pyro Studios have tested it extensively and unfortunately cannot offer support for any technical issues related to systems running Windows ME.

q 64 MB RAM: Praetorians can run on systems with 64 MB RAM and Windows 98 (not 2000 or XP) though this may affect performance. Neither Eidos Interactive or Pyro Studios can offer support for any technical issues relating to computers with less than 128 MB RAM.

q Graphics Cards: Technically speaking Praetorians may run on Graphics Card with as low as 8 MB RAM as long as the drivers are supported by DirectX 8.1 or higher. Again this has not been tested extensively so neither Eidos Interactive nor Pyro Studios can offer support for any technical issues relating to Graphics Cards with less than 16 MB RAM and without DirectX 8.1 (or higher) support.

Part 2: Technical Issues

2.1 Installation & Set-up

System Requirements

The minimum system requirements are as follows:


IBM PC or 100% compatible


Microsoft Windows 98/2000/XP


Intel PIII-500 or equivalent


128 MB


100% DirectX 8.1 compatible 16Mb Graphics Card


100% DirectX 8.1 compatible Sound Card


Quad-speed (4x) CD-ROM drive


600 MB free disk space


100% Windows 98/2000/XP-compatible mouse and keyboard

Minimum Network play requirements:


Intel PIII-700 or equivalent


128 MB


56k Modem/Cable/DSL connection

The recommended system requirements are as follows:


PIII-800 or equivalent


256 MB


100% DirectX 8.1-compatible 32 MB Graphics TnL (GeForce 2+) Card


DSL (Broadband) connection

Preparing Your Hard Drive

To ensure that your installation is trouble free, you should check to see that your hard drive and file system are both tuned for optimum performance. Windows comes with two utility programs that find and fix any errors and optimise your hard drive performance. The first of these programs is called scandisk. Scandisk will check your hard drive for problems and can fix any that it finds. You can run scandisk by clicking on the Start button from the Windows Taskbar, followed by Programs, then Accessories, then System Tools, and finally scandisk. For XP and 2000 systems scandisk is found by right-clicking the drive you wish to install Praetorians, and selecting Properties, then select Tools and then clicking the Error checking button.

Once scandisk has finished running, you should next optimise your hard drive's performance by running a program called Disk Defragmenter.. You can run Disk Defragmenter by clicking on the Start button from the Windows desktop, followed by Programs, then Accessories, then System Tools, and finally Disk Defragmenter.

Installing Praetorians

Installing Praetorians is easy. Simply double-click on the self-extracting exe and the Install program will guide you through the remaining process via onscreen prompts. If at any time you are instructed to restart your computer, do so.

You will be prompted to select the path and directory to which you wish to install the game on your hard drive. The default is

C:\Program Files\Eidos Interactive\Pyro Studios\Praetorians Multiplayer Demo

You may change this if you wish to.

Starting/Loading The Game

Once the install has finished and you have opted to run the game, Praetorians will start.


q Click on the Start button.

q Choose Programs from the pop-up menu.

q Drag your mouse to the right and click on Eidos Interactive from the list.

q Drag your mouse to the right and click on Praetorians Multiplayer demo from the list.

q Click on Praetorians Multiplayer demo from the ensuing pop-up menu.

Uninstalling Praetorians

If you need to UNINSTALL Praetorians, you may do either of the following two things:

q Click on the Start button.

q Choose Programs from the pop-up menu.

q Drag your mouse to the right and click on Eidos Interactive from the list.

q Drag your mouse to the right and click on Praetorians Multiplayer demo from the list.

q Click on Uninstall Praetorians Multiplayer demo from the ensuing pop-up menu and follow the onscreen instructions.


Go to the Control Panel and choose Add/Remove Programs. Click on Praetorians Multiplayer demo from the pop-up panel to follow, select the Add/Remove button, and follow the onscreen prompts.

2.2 CD-ROM Problems

Praetorians requires at least a Quad-Speed CD-ROM drive with 32-bit Windows 98/2000/XP drivers.

I receive a " not found" error message when installing or running Praetorians

This error message is usually the result of your computer using MS-DOS (16 bit) drivers instead of Windows (32 bit) drivers for your CD-ROM drive. You can easily check to see if this is causing problems by opening the Control Panel (either click on the My Computer icon or click on the Start button followed by Settings, then Control Panel).

In the Control Panel window, double-click on the System icon then click on the Performance tab. You should now see a summary of the performance status of your computer. One of the lines should say “File System: 32-bit” and the last line should say "Your system is configured for optimal performance." If you see a message saying "Drive X is using MS-DOS compatibility mode," then you will need to contact your system vendor to obtain and install 32-bit drivers for your CD-ROM drive.

2.3 Crashes and Lock-Ups

When I start Praetorians, my mouse cursor disappears and my computer locks-up.

Chances are your installed audio card drivers are not compatible with DirectX. The only solution is to get a DirectX 8.1 or higher-compatible driver from your audio card manufacturer.

When I start Praetorians, I receive the following error message:

"The application Praetorians.exe referenced memory at address xxxx:xxxx that can't be read from."

Chances are your installed video card drivers are not compatible with DirectX. The only solution is to get a DirectX 8.1 or higher-compatible driver from your video card manufacturer.

The Installer keeps stopping when a certain percentage is complete.

There are three likely causes:

q You may have run out of free space on your hard drive. Please remove unwanted programs to free up additional space for the game, and then reinstall Praetorians.

q Files are possibly being copied to a corrupted area of your hard drive. If this is so, you'll need to run the scandisk program and make sure to use the Thorough option (see previous). After scandisk has finished running and has informed you that your drive is free of errors, try to re-install.

Praetorians is crashing to the desktop with no error messages.

This problem can be caused by several different things. Here's a list of the most common culprits associated with these crashes:

q Make sure the demo has been installed properly.

q Make sure DirectX 8.1 has been installed properly.

q Make sure you have the latest drivers for your video card and that they are DirectX 8.1 or higher-compatible.

q Make sure you have the latest drivers for your sound card and that they are DirectX 8.1 or higher compatible.

q Make sure Virtual Memory is enabled on your system.

q Run Scandisk.

q Run Disk Defragmenter.

q Clean out old temp (.TMP) files from the C:\WINDOWS\TEMP or C:\WINx\TEMP directory on your hard drive (from Windows Explorer).

q Make sure you do not have any Anti-Virus utilities (like Norton's AntiVirus) running resident prior to playing Praetorians.

q Make sure you do not have any third-party Windows memory management utilities (like QuarterDeck's QEMM) running resident prior to playing Praetorians.

q Make sure you do not have any 3rd party Windows disk caching utilities running resident prior to playing Praetorians.

q Make sure you do not have Norton's Crash Protector running resident prior to playing Praetorians.

q Try uninstalling and then reinstalling the demo.

q Try exiting the demo, rebooting your machine, and re-entering the demo.

Note that if your system crashes to the desktop while playing Praetorians, you should probably reboot your computer before starting a new play session. Otherwise, DirectDraw or DirectSound may be in a locked state, and the game will be unable to use your sound or video hardware.

2.4 DirectX-Related Questions

DirectX has become the new standard in Windows application development. Nearly all high-performance software will be geared around this technology, so we do not normally recommend that customers attempt to alter its installation on their system

Undoing Changes To Your System

Help! Praetorians has caused my system to become unstable, and I suspect that DirectX is the culprit. How can I restore my original drivers?

Unfortunately, there are some systems or hardware devices that just don't work with DirectX, and installing DirectX on these systems might cause driver-related problems. You cannot remove DirectX from your system, but you can restore the original audio and video drivers which the installation of DirectX will have replaced.

If you currently have DirectX 8.1 or higher installed either by Praetorians or previously installed, you should be able to restore the original drivers by going to the Add/Remove Programs section in the Control Panel.

If you enter the Control Panel and click on the Add/Remove Programs icon, you should see a list of all of the programs that are registered with Windows in the Add/Remove Programs Properties panel.

If you see a listing for "DirectX Drivers", double-click it to open the DirectX Set-up panel. At the bottom of this panel, there should be a button labelled Restore Display Drivers. Clicking on this button should restore the original video drivers.. After that, click on the other button labelled Restore Audio drivers. Though DirectX will remain on your system, the restoration of the older drivers may then allow you to run the program. If not, you may want to consider contacting your system vendor for 100% DirectX-compatible drivers for your video and/or sound cards OR visit the web site of the respective hardware manufacturer[s].

Can I Run Without DirectX?

I cannot use DirectX on my computer! Is there any other way to run Praetorians?

If you do not have DirectX installed on your computer, you will not be able to run Praetorians.

2.5 Technical Support

If you need further assistance after reading the Readme file please go to the tech support area of the Eidos website. A continually updated FAQ will attempt to assist you further.

NOTE: Hints and tips will not be given out over the Technical Support lines.

The latest DirectX 8.x can be downloaded from the following website:

Alternatively, you may find help with hardware problems on one of the websites maintained by the supplier, some of which are listed below:

3D labs:

ATI Technologies:

Creative Labs:





Eidos Interactive maintains a web page with links to all major video and audio card manufacturers, which is a good first stop if you are looking to upgrade your drivers. You can reach this page at:



Further technical information and drivers for Windows-based PCs can also be found at

Part 3: Game Instructions Summary3: Game Instructions Summary

3.1 Overview

When the game is first run, you must create a profile; simply enter your name and hit the “Create” button.

3.2 Game Controls


Left Mouse Button - Select

Drag - Selection box

+Shift - Add / remove troops from current selection

+Ctrl - On a troop: select all troops of the same type on the screen

- On empty space: select all troops on the screen

+Alt - Generate a mini map warning signal for allies

Right Mouse Button - Issue default order depending on target (move, attack, protect, etc)

+Ctrl - Run if need to move to perform the action

Double-clicking the left or right mouse button acts just like Ctrl-clicking in most situations.

Some orders (move and build) allow you to specify the desired facing at the destination, by dragging the mouse before releasing the mouse button. If you rotate the mouse wheel while dragging the mouse, you'll change the disposition of the troops at the destination.

Middle Button - Scroll view (scroll mode is selected from the Game Options menu)

On troop - Track that troop as it moves

Rotate Wheel - Zoom in / out.

Note: some mouse drivers do not support the Mouse Wheel for gaming purposes. You can use Page Up / Page Down keys instead.


Shift - Show queued movement orders for all troops, ranges for auras and archers

If pressed while issuing an order, the order will be queued

Page Down - Zoom in

Page Up - Zoom out

Arrow keys - Scroll view

TAB - Hide / show game interface

ESC - Pause the game and bring up in-game menu

Space - Center view on selected troop

F1 - Show the position of the last mini map warning.

F2 - Cycle through the scouts.

F3 - Cycle through the special units (generals & medics).

F4 - Cycle through the controlled villages.

F5 - Toggle mini map civilization colors.

F6 - Toggle selection group bar.

F7 - Toggle Stats info panel.

F8 - Toggle Minimap image.

F9 - Mission objectives.

F10 - Pause the game and bring up in-game menu.

F11 - Tips window

Ctrl+S - Quicksave game

Ctrl+L - Load the last Quicksaved game

1...9 - Recall selection group

Ctrl+ 1...9 - Assign current selection to selection group

Shift+ 1...9 - Add selection group to current selection

Ctrl+Shift+ 1...9 - Add current selection to selection group

0 - Select all troops not assigned to a group

Ctrl+0 - Remove currently selected troops from their selection group

C - Cycle through the command panels

T - Track selected troop as it moves

W - Generate a mini map signal for allies

X - Select all troops in the entire map

Z - Select all troops on screen

A - Attack

B - Balance Troops

D - Defensive Stance

F - Facing

G - Aggressive Stance

H - Hold Position

J - Join Troops

L - Patrol

M - Move

N - Cycle through the available formations

P - Protect

R - Repair

S - Divide Troops

3.3 Gameplay Tips

You can get useful gameplay tips by using the Tip Window. To bring it up at any time, just press the F11 key. To display more available tips, use the left and right arrows at the bottom of the panel. Other useful keys are F9 to display the Objectives menu, and F10 or ESC to bring up the main menu.

Capturing Villages

If the village is captured by the enemy, you've got to destroy the enemy's garrison by attacking it with your forces. Then, use an Auxiliary Infantry troop to build your own garrison. Just select the Infantry and right click on the village. Once you have captured a village, select one of your Centurions and instruct him to go inside by right clicking on the village.

Recruiting new troops

Centurions are able to train new troops from the population of villages. Recruitment commands can be queued using the Recruiting menu, and will be carried out when the Centurion goes inside a captured village. Additional troops can be queued there as well.

You can see the cost of each troop in the tooltip over the troop's icon. Some troops need Honor Points in order to be recruited. Honor points are earned by fighting the enemy.

Building Structures

Auxiliary Infantry is important as they are in charge of building and repairing structures and war machines. Check the Construction menu to see what options you have available.

Sometimes you must build a bridge over a river. In order to do so, select an Auxiliary Infantry troop, right click over one of the suitable sites in the river, and just wait until the job is completed. Those spots are marked with bridge remains.

Demoting and Promoting

You can use the Demote command to obtain an Auxiliary Infantry from other troops. This may be necessary if you need to build something and don't have any Infantry troops left.

You can raise a new Centurion from any troop by using the Promote command. You can have one Centurion for every 100 Unit Control Points.

Types of Terrain

There are various types of terrain in the map, and some troops are not allowed to traverse some of them. For example, Cavalry troops can't enter thick forests, while the Legionaries can't step on shallow waters.

The mouse pointer will change its appearance depending of the type of terrain that the unit is on: a leaf for thick forests, a drop of water for riversides, and so on.

Exploring the map

There are two kinds of scouting units. The Hawk Scout can send his trained Hawk to explore the terrain from above. Its main use is to gain visibility over a hill for your ranged units.

The Wolf Scout can enter forests and see what's in there before sending your troops to a potential ambush.

Healing your Troops

The Roman Physician and the Barbarian Druid are healing units. They both have a Regeneration Aura, inside which any troop will slowly regain its health. You can also use the Heal ability to recover your troops faster at the expense of the healer's Stamina.

Running and queuing orders

You can command almost any kind of troop to run by double clicking on their destination or by holding the CRTL key pressed while issuing the command. Running will deplete your troop's Stamina, though.

Issuing a command while the SHIFT key is down will queue that order. Queued commands will be executed in order automatically, which will free you to attend other tasks.

How to use special abilities

Many of the troops under your command have special abilities. To use any of these, just use the appropriate icon in the Command Panel of the interface. Many special abilities can be used automatically; this is shown by the special border around the icon. You can right click on the icon to disable this automatic mode.

Special abilities use some of your troops' Stamina.

Using Special Abilities

Some troops have special formations that can be activated from the Command Panel of the interface. Every formation has an effect on the mobility, defense and attack values of the troop.

Special formations do not use any of your troops' Stamina.

Please note that you may access extra information about Praetorians through the official website…

Official website

You can also find out about other Eidos and Pyro Studios projects through our websites…

Eidos Interactive

Pyro Studios

You might also be interested in…

Praetorians Single-Player Demo

A grand RTS, Praetorians focuses on military combat between...

Plants vs. Zombies Game of the Year Edition 3.1

Game that allows users to defend themselves against zombies with plants

Age Of Empires II Age of Kings Gold Edition

Strategic conquest game with 18 civilizations to choose from

Ice Age Adventures

Android and Windows mobile adventure game based on the movie

Age of Empires III The WarChiefs

Expansion pack for the Age of Empire RTS game

Train Simulator 2015

Realistic software that lets you try out an array of locomotives